Hot dip galvanizing in Kurgan
The use of hot-dip galvanizing technology allows to protect various metal elements from corrosion and other processes that adversely affect the structure and, consequently, the reliability of products. The use of reliable equipment allows you to achieve serious results: protection for up to 50 years without serious costs and the need for constant updating of the coating.
Zinc is applied in a special production complex, which is equipped with everything necessary for the correct implementation of each stage in accordance with the standards. Hot-dip galvanizing in Kurgan is carried out quite quickly due to the use of modern technology, involving several preparatory stages.
Hot-dip galvanizing process
Despite the fact that all work is carried out according to the approved standards, the most favorable conditions are selected for the galvanization of different materials. Any product undergoes an assessment, which determines the presence of corrosion damage and their degree. These data allow you to properly perform acid cleaning of surfaces after chemical degreasing.
It is important to understand that unlike the use of other common methods of strengthening metals, hot-dip galvanizing provides not only a General barrier protection, but also electrochemical. This means that when scratches, chips or cracks appear on the coating, the metal under it will remain protected. This is largely due to the important stage of the coating flux. It is performed before placing the blanks directly into the zinc bath, heated to 450 degrees. The main procedure takes specialists 5-10 minutes, all the preparatory work is expected to be also relatively short. Thus, hot-dip galvanizing in the Mound is a quick and effective way to combat harmful corrosion of the metal.
Advantages of technology
If hot-dip galvanizing is carried out taking into account all the requirements, then it can be used to increase the shelf life of metal structures and other products used both on an industrial scale and in everyday life. Specialists of our company guarantee full protection of details and recommend to use galvanizing, after all it practically does not influence operational characteristics of metal. Equally successfully we process both large elements and small fasteners.