Request a call
Enter your phone number and we will call you yourself

Thank you, your application has been accepted.

In the near future the manager will contact you.

8 (343) 382-53-46
Official partner
Сталепромышленная компания Zinga ZMK-ENERGO
Extensive experience
Quality assurance
Comprehensive Services

When it is necessary to use additional coatings

Galvanizing a welded metal structure using the hot-dip method requires a clean weld area because this parameter affects the appearance and quality of the final result.

When using a coated electrode for welding, all slag produced during the work process must be removed prior to galvanizing, otherwise the coating will not be securely attached to the surface at the welding sites, resulting in bare spots on the coating.

Use of chemical detergents, which are used in the galvanizing process, are not able to remove the slag from welding, and therefore it is required to apply grinding using abrasive jet or fire cleaning, wire brush.

Slag produced during welding melts under the influence of the welding wire and remains on the welding seams. Seams that perform bare wire, do not lead to the appearance of slag, and therefore do not require grinding.

Work with professionals

We have brought the technology of hot-dip galvanizing to perfection and are rightly proud of it. They deserved an impeccable reputation, acquired a large base of loyal customers who are satisfied that they chose us as a reliable performer.

Leave a request for hot-dip galvanizing, and we will answer all your questions, discuss the terms of cooperation and be sure to find a mutually beneficial option. Trust our professionalism!

Contact us
8 (343) 382-53-46
Ask a Question

hank you, your message is accepted.

The answer will be sent to the specified e-mail.

ul. Melnikova, house 38, pom. 105
+7 (343) 382-53-46
ul. Melnikova, house 38, pom. 105
+7 (343) 382-53-46